PIC24FJ192GB108-I/PT

MCU, 16BIT, 192K FLASH, 16MIPS, 80TQFP; Controller Family/Series:PIC24; Core Size:16bit; No. of I/O’s:65; Program Memory Size:192KB; RAM Memory Size:16384Byte; CPU Speed:32MHz; Oscillator Type:External, Internal; No. of Timers:5; Peripherals:ADC, Comparator, PWM, RTC, Timer; No. of PWM Channels:9; Digital IC Case Style:TQFP; Supply Voltage Range:2V to 3.6V; Operating Temperature Range:-40°C to +85°C; No. of Pins:80; SVHC:No SVHC (15-Dec-2010); Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Clock Frequency:32MHz; Flash Memory Size:192KB; Interface:I2C, JTAG, SPI, USB; Interfac… Features
  CPU
     – Up to 16 MIPS performance
     – 16 x 16 Hardware Multiply, Single Cycle Execution
     – 12-bit x 16-bit Hardware Divider
     – C Compiler Optimized Instruction Set
  nanoWatt Power Managed Modes
     – Run, Idle and Sleep modes
     – Multiple, Switchable Clock Modes for Optimum Performance and Power Management
     – Run mode: 1 mA/MIPS, 2.0V Typical
     – Sleep mode Current Down to 100 nA Typical
     – Standby Current with 32 kHz Oscillator:2.5 uA,2.0V typical
  Flash Program Memory
     – Self-Reprogrammable under Software Control
     – 10,000 erase/write cycles
     – 20 year data retention
     – EEprom emulation capable
  System
     – Internal oscillator support – 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
     – On-chip LDO Voltage Regulator
     – JTAG Boundary Scan and Flash Memory Program Support
     – Fail-Safe Clock Monitor – allows safe shutdown if clock fails
     – Watchdog Timer with separate RC oscillator
  Analog Features
     – 10-bit ADC, 16 channels, 500k samples per second
     – Three Analog comparators
  Universal Serial Bus Features
     – USB v2.0 On-the-Go compliant
     – dual role capable, can act as either Host or Device
     – Low speed(1.5Mb/s) and full speed(12 Mb/s) operation in host mode
     – Full speed USB operaton in Device mode
     – Supports 32 endpoints
     – On-chip USB transceiver
  Peripherals
     – CTMU supports Capacitive Touch applications
     – Perpheral Pin Select allows I/O remapping of many peripherals in real time
     – 4xUART Modules with LIN and IrDA support, 4 Deep FIFO
     – 3xSPI ™ Modules with 8 Deep FIFO
     – 3xI2C™ Modules with Master and Slave Modes
     – Five 16-bit Timer Modules
     – Up to 9 Input Capture and 5 Output Compare/PWM with dedicated time base
     – Hardware RTCC, Real-Time Clock Calendar with Alarms
     – PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data
Microchip PIC24FJ192GB108-I/PT datasheet: