P0496

Model: P0496
Manufacturer: Terasic Inc.
Description: Cyclone V SE SoC DE10-Nano 5CSEBA6 Cyclone® V SE FPGA + MCU/MPU SoC Evaluation Board
The DE10-Nano Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.

The DE10-Nano Development Kit contains all the tools needed to use the board in conjunction with a computer that runs the Microsoft Windows XP or later.
FPGA Device:
– Intel Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)
– Serial configuration device – EPCS64 (revision B2 or later)
– USB-Blaster II onboard for programming; JTAG Mode
– HDMI TX, compatible with DVI 1.0 and HDCP v1.4
– 2 push-buttons
– 4 slide switches
– 8 green user LEDs
– Three 50MHz clock sources from the clock generator
– Two 40-pin expansion headers
– One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
– One 10-pin Analog input expansion header (shared with Arduino Analog input)
– A/D converter, 4-pin SPI interface with FPGA
HPS (Hard Processor System):
– 800MHz Dual-core ARM Cortex-A9 processor
– 1GB DDR3 SDRAM (32-bit data bus)
– 1 Gigabit Ethernet PHY with RJ45 connector
– USB OTG Port, USB Micro-AB connector
– Micro SD card socket
– Accelerometer (I2C interface + interrupt)
– UART to USB, USB Mini-B connector
– Warm reset button and cold reset button
– One user button and one user LED
– LTC 2×7 expansion header

DE10-Nano User Manual (rev. A/B Hardware)

Block Diagram of the DE10-Nano Board:

Type: FPGA + MCU/MPU SoC
For Use With/Related Products: 5CSEBA6
Tool Is For Evaluation Of: 5CSEBA6U23I7
Interface Type: Ethernet, GPIO, HDMI, UART, USB
Platform: Cyclone V SE SoC DE10-Nano
Interconnect System: Arduino R3 Shield
Operating Supply Voltage: 5V
Unit Weight: 1lb