Features:
Typical nanoWatt XLP specifications include:
Sleep mode currents as low as 30nA at 25C
Run mode currents under 350uA/MHz)
Idle mode currents under 80uA/MHz at 1.8V
Watchdog timer as low as 210nA at 25C
256 Bytes of Data EEPROM
CPU:
Up to 16 MIPS performance
Single Cycle Instruction Execution
16 x 16 Hardware Multiply, & 32-bit x 16-bit Hardware Divider
C Compiler Optimized Instruction Set System
Peripherals:
Two Analog rail-to-rail comparators Peripherals
2 UART Modules with LIN and IrDA support
2 Master Synchronous Serial Port modules (MSSPs) with Two modes of operation : SPI/ I2C™
One Enhanced CCP module (ECCP) and two CCP modules
| Parameter Name | Value |
| Architecture | 16-bit |
| CPU Speed (MIPS) | 16 |
| Memory Type | Flash |
| Program Memory (KB) | 8 |
| RAM Bytes | 1,024 |
| Temperature Range C | -40 to +85 |
| Operating Voltage Range (V) | 1.8 to 3.6 |
| I/O Pins | 18 |
| Pin Count | 20 |
| System Management Features | BOR, LVD |
| POR | Yes |
| WDT | Yes |
| Internal Oscillator | 8 MHz, 32 kHz |
| nanoWatt Features | Low Sleep/Fast Wake/Fast Control |
| Digital Communication Peripherals | 2-UART 2-SPI 2-I2C 2-MSSP(SPI/I2C) |
| Comparators | 2 |
| Capture/Compare/PWM Peripherals | 3/3 |
| PWM Resolution bits | 10 |
| Timers | 2 x 16-bit 1 x 32-bit |
| Parallel Port | GPIO |
| XLP | Yes |
