Parameter Name
 Max Speed MHz
 Program Memory Size (KB)
 DMA Channels
 I2CTM Compatible
 A/D channels
 Max A/D Sample Rate
 Input Capture
 Output Compare/Std. PWM
 16-bit Digital Timers
 Parallel Port
 Internal Oscillator
 8 MHz, 32 kHz
 I/O Pins
 Pin Count

MCU Core
    80MHz, 1.56 DMIPS/MHz, 32-bit MIPS M4K® Core
    USB 2.0 On-The-Go Peripheral with integrated PHY
    10/100 Ethernet MAC with MII/RMII Interfaces
    2 x CAN2.0b modules with 1024 buffers
    8 Dedicated DMA Channels for USB OTG, Ethernet, and CAN
    5 Stage pipeline, Harvard architecture
    MIPS16e mode for up to 40% smaller code size
    Single cycle multiply and hardware divide unit
    32 x 32-bit Core Registers
    32 x 32-bit Shadow Registers
    Fast context switch and interrupt response
MCU System Features
    512K Flash (plus 12K boot Flash)
    128K RAM (can execute from RAM)
    8 Channel General Hardware DMA Controller
    Flash prefetch module with 256 Byte cache
    Lock instructions or data in cache for fast access
    Programmable vector interrupt controller
Analog Features
    Fast and Accurate 16 channel 10-bit ADC,
    Max 1 Mega sample per second at +/- 1LSB, conversion available during SLEEP & IDLE
Power Management Modes
    RUN, IDLE, and SLEEP modes
    Multiple switchable clock modes for each power mode, enables optimum power settings
Debug Features
    8 hardware breakpoints (6 Instruction and 2 Data)
    2 wire programming and debugging interface
    JTAG interface supporting Programming, Debugging and Boundary scan
Other MCU Features
    Fail-Safe Clock Monitor – allows safe shutdown if clock fails
    2 Internal oscillators (8MHz & 31KHz)
    Hardware RTCC (Real-Time Clock and Calendar with Alarms)
    Watchdog Timer with separate RC oscillator
    Pin compatible with 16-bit PIC® MCUs
    Serial Communication Modules allow flexible UART/SPI/I2C™ configuration
PIC32MX5XX/6XX/7XX Family Data SheetApplication Notes & Code Examples

Danh mục: