MECHANICAL Operation Force: 800g MaxStroke: 2.00mmOperation temp: -20degree ~ 70degreeStorage Temp: -40degree to 85degreeMATERIALSBASE: Engineering plastics,Black. COVER: Engineering plastics,Red. BUTTON: Engineering plastics,White. TERMINAL: Alloy copper,Gold plating.ELECTRICALElectrical Life: 2000 operations cycles per switch.Non-Switching Rating: 100mA,50VDCSwitching Rating: 25mA,24VDCContact Resistance: 50m Max,at initial;100m Max,after life test.Insulation Resistance: 100m,500VDCDielectric Serength: 500VCD/1 minuteCapacitance: 5pF Max.Circuit:Single pole single throw.SOLDERING AND CLEANING PROCESSESKeep all switch contacts in their “OFF” position for all operation .Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.Freon TF or TE give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.PACKINGAll DIP switches are packed in standard IC tube.? pcs / Tube, ? pcs/ Box