ENC28J60-I/SP

Parameter NameValueMAC Yes PHY Yes TX/RX RAM Buffer(bytes) 8192 Interrupt Pin 1 LEDs 2 Op. Voltage (V) 3.3 Temp. Range Min. (°C) -40 Temp. Range Max. (°C) 85 Max. Speed (MHz) 25 Interface SPI Pre-Programmed MAC Address No Security Engines No Standalone Ethernet Controller 10Base-T Parameter NameValueMAC Yes PHY Yes TX/RX RAM Buffer(bytes) 8192 Interrupt Pin 1 LEDs 2 Op. Voltage (V) 3.3 Temp. Range Min. (°C) -40 Temp. Range Max. (°C) 85 Max. Speed (MHz) 25 Interface SPI Pre-Programmed MAC Address No Security Engines No Standalone Ethernet Controller 10Base-TGeneral: – IEEE 802.3 compatible Ethernet Controller – Integrated MAC and 10BASE-T PHY – 8 Kbyte Transmit/Receive Packet Dual Port Buffer  SRAM – Programmable Automatic Retransmit on Collision – Programmable Padding and CRC Generation – Programmable Automatic Rejection of Erroneous Packets Buffer: – Configurable transmit/receive buffer size – Hardware managed circular receive FIFO – Byte-wide random and sequential access – Internal DMA for fast memory copying – Hardware assisted IP checksum calculation PHY: – Wave shaping output filter – Loopback mode MAC: – Support for Unicast, Multicast and Broadcast packets – Programmable pattern matching of up to 64 bytes within     packet at user defined offset – Programmable wake-up on multiple packet formats,    including Magic Packet®, Unicast, Multicast, Broadcast,    specific packet match or any packet Packaging: – SOIC – SPDIP – SSOP – QFN (6×6 mm)ENC28J60 Stand-Alone Ethernet Controller with SPI Interface